Manufacture of Cutback Bitumen MC-30

Manufacture of Cutback Bitumen MC-30

Cutback Bitumen MC-30

Cutback Bitumen MC-30 Review

Medium Curing  (MC) 30 Bitumen is a liquid bitumen mostly used for paving asphalt, primer in coating. This reduction in viscosity allows for better penetration into the road surface and improved adhesion between layers of asphalt pavement. Its low viscosity allows for better penetration into the road surface and improved adhesion between asphalt pavement layers.

MC-30 Bitumen Properties

  • Viscosity: Viscosity measures the fluidity or thickness of MC-30 bitumen at a specified temperature.
  • Flash point: The flash point is the lowest temperature at which the vapors from MC-30 bitumen ignite momentarily when exposed to a flame.
  • Penetration: Penetration indicates the hardness or softness of bitumen by measuring.
  • Ductitllity : measures the ability of MC-30 bitumen to stretch without breaking.

Specification

Properties Min Max Test Method
Kinematic viscosity at 60°c ,cST 30 60 ASTM D2170
Flash point(tag open cup), °C 38 ASTM D3143
Distillation test
Distillate, volume per cent of total Distillate to 680°F (360°C)
Residue from distillation to 437°F (225°C) 25 ASTM D402
to 500°F (260°C) 30 75 ASTM D402
to 600°F (316°C) 75 95 ASTM D402
to 680°F (360°C), per cent volume by difference 50 ASTM D402
Test on residue from distillation test
Viscosity at 140°F (60°C) 30 120 ASTM D2170
Penetration 77°F (25°C) 100g, 5s mm 120 300 ASTM D5
Ductility 77°F (25°C) 5cm/min cm 100 ASTM D113
Solubility in trichloroethylene % 99 ASTM D2042
Water, percent volume 0.2 ASTM D95

Packing of Bitumen MC-30

Cutback Bitumen Medium Curing 30 packed in kind of packing :

  1. HDPE Drum- Palletized and Shrink Wrapped
  2. 1MT IBC Tank
  3. 200kg New Steel Drum- Palletized and Shrink Wrapped

Kinds of Packing

1. HDPE Drum- Palletized and Shrink Wrapped

  • Loading 80Drum in 20ft Container= 16 Ton Net
HDPE Drum Emulsion cutback

2. 1MT IBC Tank

  • Loading 20 IBC in 20ft Container= 20 Ton Net
Bitumen China

3. 200kg New Steel Drum- Palletized and Shrink Wrapped

  • Loading 80Drum in 20ft Container= 16 Ton Net
200kg New Steel Drum-Emulsion-cutback

Supplier of MC -30 Bitumen

RAHA Bitumen Co., as a supplier of MC-30 Bitumen in East Asia and Africa. We have over 13 years of experience in exporting different grades of bitumen.

Destination of Cutback MC-30

Cutback Bitumen Medium Curing 30 can be exported to various regions in East Asia, such as China, Malaysia, Thailand, Taiwan, Vietnam, Philippines, Indonesia, and Cambodia. Additionally, it can also be exported to certain African countries, including Congo, Djibouti, and Rwanda.

If you are interested in exporting Cutback Bitumen MC-30 to East Asia and Africa, please feel free to contact us. Our team specializes in facilitating international trade and ensuring the highest quality standards for bitumen. We are committed to providing seamless service, competitive pricing, and reliable delivery schedules to meet your specific requirements.

Cutback Bitumen MC-30

Cutback Bitumen MC-30 Review

Medium Curing  (MC) 30 Bitumen is a liquid bitumen mostly used for paving asphalt, primer in coating. This reduction in viscosity allows for better penetration into the road surface and improved adhesion between layers of asphalt pavement. Its low viscosity allows for better penetration into the road surface and improved adhesion between asphalt pavement layers.

MC-30 Bitumen Properties

  • Viscosity: Viscosity measures the fluidity or thickness of MC-30 bitumen at a specified temperature.
  • Flash point: The flash point is the lowest temperature at which the vapors from MC-30 bitumen ignite momentarily when exposed to a flame.
  • Penetration: Penetration indicates the hardness or softness of bitumen by measuring.
  • Ductitllity : measures the ability of MC-30 bitumen to stretch without breaking.

Specification

Properties Min Max Test Method
Kinematic viscosity at 60°c ,cST 30 60 ASTM D2170
Flash point(tag open cup), °C 38 ASTM D3143
Distillation test
Distillate, volume per cent of total Distillate to 680°F (360°C)
Residue from distillation to 437°F (225°C) 25 ASTM D402
to 500°F (260°C) 30 75 ASTM D402
to 600°F (316°C) 75 95 ASTM D402
to 680°F (360°C), per cent volume by difference 50 ASTM D402
Test on residue from distillation test
Viscosity at 140°F (60°C) 30 120 ASTM D2170
Penetration 77°F (25°C) 100g, 5s mm 120 300 ASTM D5
Ductility 77°F (25°C) 5cm/min cm 100 ASTM D113
Solubility in trichloroethylene % 99 ASTM D2042
Water, percent volume 0.2 ASTM D95

Packing of Bitumen MC-30

Cutback Bitumen Medium Curing 30 packed in kind of packing :

  1. HDPE Drum- Palletized and Shrink Wrapped
  2. 1MT IBC Tank
  3. 200kg New Steel Drum- Palletized and Shrink Wrapped

Kinds of Packing

1. HDPE Drum- Palletized and Shrink Wrapped

  • Loading 80Drum in 20ft Container= 16 Ton Net
HDPE Drum Emulsion cutback

2. 1MT IBC Tank

  • Loading 20 IBC in 20ft Container= 20 Ton Net
Bitumen China

3. 200kg New Steel Drum- Palletized and Shrink Wrapped

  • Loading 80Drum in 20ft Container= 16 Ton Net
200kg New Steel Drum-Emulsion-cutback

Supplier of MC -30 Bitumen

RAHA Bitumen Co., as a supplier of MC-30 Bitumen in East Asia and Africa. We have over 13 years of experience in exporting different grades of bitumen.

Destination of Cutback MC-30

Cutback Bitumen Medium Curing 30 can be exported to various regions in East Asia, such as China, Malaysia, Thailand, Taiwan, Vietnam, Philippines, Indonesia, and Cambodia. Additionally, it can also be exported to certain African countries, including Congo, Djibouti, and Rwanda.

If you are interested in exporting Cutback Bitumen MC-30 to East Asia and Africa, please feel free to contact us. Our team specializes in facilitating international trade and ensuring the highest quality standards for bitumen. We are committed to providing seamless service, competitive pricing, and reliable delivery schedules to meet your specific requirements.

Leave A Comment