Manufacturer and Supplier in Vietnam
RAHA Bitumen Co, as a manufacturer and Bitumen Supplier in Vietnam, we have over 13 years Experience in Supplying and Exporting in East Asia Regions.
Destination Ports
we specialize in exporting various types of bitumen to most destination ports across the country, Such as :
- Ho Chi Minh
- Hai Phong
- Da Nang
Our Method to Supply Vietnam
We have used two ways, internationally recognized shipping, Including:
- CFR (Cost and Freight)
- CIF (Cost, Insurance, and Freight)
The Available Bitumen Grades
We are providing different grades of Bitumen in deferent region in Southeast Asia. the Available grades of Bitumen including:
- Bitumen penetration: 60/70, 80/100, 50/70, 40/50
- Bitumen Emulsion: CRS-1, SS-1, K1-40, K1-60
- Cutback Bitumen: MC-3000, MC-250, MC-70, MC-30, RC-70, RC-30
- Oxidized Bitumen: 150/50, 115/15, 90/15, 85/25
Packing of Kinds of Bitumen
| SPECIFICATION | UNIT | VALUE | TEST METHOD |
|---|---|---|---|
| Penetration 25°C | 1/10 Millimeters (mm) | 60-80 | ASTM D5 |
| Softening Point | Degree Celsius (°C) | Min 42 | ASTM D36 |
| Ductility, 15°C | Kilogram per Cubic Meter (kg/m³) | 1.000/1.060 | ASTM D70 |
| Ductility, 15°C, 5CM/MIN | Centimeters | Min 100 | ASTM D113 |
| Ductility, 10°C, 5CM/MIN | Centimeters | Min 20 | ASTM D113 |
| Flash Point | Degree Celsius (°C) | Min 260 | ASTM D92 |
| Dynamic Viscosity 60°C | Poises | Min 130 | ASTM D2171 |
| Solubility in Trichloroethylene | Weight Percentage (WT%) | Min 99.5 | ASTM D 2042 |
| SPECIFICATION | UNIT | VALUE | TEST METHOD |
|---|---|---|---|
| Penetration | 1/10 Millimeters (mm) | 80-100 | ASTM D5 |
| Softening Point | Degree Celsius (°C) | 42-52 | ASTM D36 |
| Density, 25°C | Kilogram per Cubic Meter (kg/m³) | 1.000/1.060 | ASTM D71/D3289 |
| Ductility, 25°C | Centimeters per Second (cm/s) | 100 min | ASTM D113 |
| Drop-in Penetration After Heating | Percentage (%) | 20 max | ASTM D6/D5 |
| Flash Point (Cleveland Open Cup) | Degree Celsius (°C) | 225 min | ASTM D92 |
| Solubility in Trichloroethylene | Weight Percentage (WT%) | 99 min | ASTM D4 |
| Loss of Weight | Percentage (%) | 0.8 max | ASTM D1754 |
| Retained Penetration After Thin Film | Percentage (%) | 50 min | ASTM D5 |
| Ductility 25°C After Thin Film Oven | Centimetres per Second (cm/s) | 100 min | ASTM D113 |
| Ductility 15°C After Thin Film Oven | 100 min | 100 min | ASTM D113 |
| Temperature | Degree Celsius (°C) | 90-110 Max | —- |
| Bitumen Content | Percentage (%) | 99.9 min | ASTM D4 |
| Specification | Unit | Standard | MIN | MAX |
|---|---|---|---|---|
| Penetration | Â dmm. | ASTM D5 | 60 | 70 |
| Softening Point | °C | ASTM D36 | 49 | 56 |
| Specific Gravity | Gr/Cm³ | ASTM D70 | 1.01 | 1.06 |
| Flash Point | °C | ASTM D92 | 230 | – |
| Ductility at 25°C | Cm | ASTM D113 | 100 | – |
| Solubility In Trichloroethylene | WT% | ASTM D2042 | 99 | 100 |
| Loss On Heating | WT% | ASTM D6 | – | 1 |
| Drop-In Penetration After Heating | % | ASTM D6 | – | 20 |
| ASTM D1754 | ASTM D1754 | ASTM D1754 | ASTM D1754 | ASTM D1754 |
| Retained Penetration | % | ASTM D5 | 52 | – |
| Increase In Softening Point | °C | ASTM D36 | – | 10 |
| Ductility | Cm | ASTM D113 | 50 | – |
| Sport Test | A.A.S.H.T.O.102 | A.A.S.H.T.O.102 | Negative | Negative |
| Bitumen 80/100 | Test method | Unit | Specification |
|---|---|---|---|
| Specific gravity @ 25°C | ASTM D70 | Kg/cm3 | 1.01/1.06 |
| Penetration @ 25°C | ASTM D5 | mm/10 | 80/100 |
| Softening point °C | ASTM D36 | °C | 42/50 |
| Ductility @25 °C | ASTM D113 | cm | 100 min |
| Loss on heating(wt) % | ASTM D6 | wt % | 0.2Â max |
| Drop in penetration after heating % | ASTM D5-D6 | % | 20 max |
| Flashpoint °C | ASTM D92 | °C | 250 min |
| Solubility in CS2(wt) % | ASTM D4 | wt % | 99.5 min |
| Spot test | A.A.S.H.O.T102 | Negative |
| Bitumen 115/15 | Specification | Test method |
|---|---|---|
| Specific gravity @ 25/25 cg | 1.05 | D-70 |
| Penetration @ 25 c | 20/10 | D-5 |
| Softening point c | 110/120 | D-36 |
| Ductility @25 c | 1.5 min | D-113 |
| Loss on heating(wt) % | 0.2 Max | D-6 |
| Flashpoint c | 260 min | D-92 |
| Solubility is CS2(wt) % | 99 min | D-4 |
1. 25kg Carton Box- Palletized and Shrink
Wrapped:
2. 25kg PP Bag- Palletized and Shrink
Wrapped
1. Jumbo Bag
1. Jumbo Bag
2. Steel Drums
3. Flexi Tanks
4. Bulk in Truck Tanker
5. Bulk in Bulk Vessel
6. Bulk in Bitutainer
SGS Certification
Our Bitumen products include SGS certification that strictly follows international norms for quality and safety.
The SGS certificate ensures that our Bitumen is ready to meet the demands of the domestic and international markets.
Buy Bitumen Vietnam
If you’re interested in specific grades of Bitumen or need assistance choosing the right product, please don’t hesitate to reach out. Contact us directly or message us on WhatsApp for prompt service and inquiries.
