Supply Bitumen in Different Countries of Africa
RAHA Bitumen Co., as a Bitumen Supplier in Africa Countries, We can Supply to these region such as:
Kenya, Nigeria, Algeria, Angola, Libya, Egypt, South Africa, Ghana, Congo, Cameroon, and Sudan can supply bitumen to them.
Destination Ports of Each Country
- Libya => Tripoli, Misrata, Benghazi
- Kenya => Mombasa, Lamu, Kisumu
- Nigeria => Lagos, Harcourt, Onne
- Liberia => Monrovia, Buchanan, Greenville
- Sudan => Sudan, Ossif, Sawakin
- South Africa => Durban, Cape Town, Richards Bay
- Congo => Matadi, Boma, Banana
- Algeria => Algiers , Oran , Skikda
- Angola => Luanda, Lobito, Cabinda
- Egypt => Alexandria , Damietta, Sokhna
- Ghana => Tema, Takoradi, Sekondi
- Cameroon => Douala, Kribi, Limbe
Our Method to Supply Kenya
We have used two ways, internationally recognized shipping, Including:
- CFR (Cost and Freight): we take responsibility for delivering the bitumen to the port of destination in Africa. This includes covering the cost of the goods and all transportation fees to the port.
- CIF (Cost, Insurance, and Freight): We go a step further by not only covering the cost of the bitumen and freight but also arranging insurance for the shipment during transit. This means you receive a fully insured delivery to the port of destination in Africa.
The Available Bitumen Grades in Africa
- Performance Grade Bitumen (PG): PG 76-22 , PG 76-16, PG 76-10
- Viscosity Grade Bitumen (VG): VG 20, VG 30, VG 40
- Bitumen Emulsion: SS-1, SS-1h, CSS1, CSS-1h,
- Cutback Bitumen: MC-3000, MC-70, MC-30, RC70, RC-30
- Bitumen Penetration: 80/100, 60/70, 40/50
Famous Specification of Bitumen Grades
| Specification | Unit | Standard | MIN | MAX |
|---|---|---|---|---|
| Penetration | dmm. | ASTM D5 | 60 | 70 |
| Softening Point | °C | ASTM D36 | 49 | 56 |
| Specific Gravity | Gr/Cm³ | ASTM D70 | 1.01 | 1.06 |
| Flash Point | °C | ASTM D92 | 230 | – |
| Ductility at 25°C | Cm | ASTM D113 | 100 | – |
| Solubility In Trichloroethylene | WT% | ASTM D2042 | 99 | 100 |
| Loss On Heating | WT% | ASTM D6 | – | 1 |
| Drop-In Penetration After Heating | % | ASTM D6 | – | 20 |
| ASTM D1754 | ASTM D1754 | ASTM D1754 | ASTM D1754 | ASTM D1754 |
| Retained Penetration | % | ASTM D5 | 52 | – |
| Increase In Softening Point | °C | ASTM D36 | – | 10 |
| Ductility | Cm | ASTM D113 | 50 | – |
| Sport Test | A.A.S.H.T.O.102 | A.A.S.H.T.O.102 | Negative | Negative |
| Bitumen 80/100 | Test method | Unit | Specification |
|---|---|---|---|
| Specific gravity @ 25°C | ASTM D70 | Kg/cm3 | 1.01/1.06 |
| Penetration @ 25°C | ASTM D5 | mm/10 | 80/100 |
| Softening point °C | ASTM D36 | °C | 42/50 |
| Ductility @25 °C | ASTM D113 | cm | 100 min |
| Loss on heating(wt) % | ASTM D6 | wt % | 0.2 max |
| Drop in penetration after heating % | ASTM D5-D6 | % | 20 max |
| Flashpoint °C | ASTM D92 | °C | 250 min |
| Solubility in CS2(wt) % | ASTM D4 | wt % | 99.5 min |
| Spot test | A.A.S.H.O.T102 | Negative |
| SPECIFICATION | UNIT | VALUE | METHOD |
|---|---|---|---|
| AVERAGE 7-DAY MAXIMUM PAVEMENT DESIGN TEMPERATURE |
°C | <76 | —— |
| MINIMUM PAVEMENT DESIGN TEMPERATURE |
°C | > -22 | —— |
| FLASH POINT TEMPERATURE | °C | >230 | AASHTO T48 |
| VISCOSITY, T 316, MAXIMUM 3 PAS, TEST TEMP, °C |
°C | 135 | AASHTO T316 |
| DYNAMIC SHEAR, T 315, G*/SIN MINIMUM 1.00 KPA TEST TEMPERATURE, @10 RAD/S,°C |
°C | 76 | AASHTO T315 |
| ROLLING THIN FILM OVEN TEST (T 240) | |||
| MASS CHANGE, MAXIMUM, PERCENT |
% | 1.00 | AASHTO T240 |
| Dynamic Shear G*/sin Minimum 2.2 KPa Test Temperature, @10 rad/s |
°C | >2.2 | AASHTO T315 |
| PRESSURE AGING VESSEL (PAV) TEST (AASHTO R28) | |||
| DYNAMIC SHEAR, T 315, G*/SIN, MAXIMUM 5000 KPA TEST TEMPERATURE, @10 RAD/S |
°C | 31 | AASHTO T315 |
| CREEP STUFFINESS, T 313, S, MAXIMUM 300 MPA, M-VALUE, MINIMUM 0.300 TEST TEMPERATURE, @60S, °C |
°C | -12 | AASHTO T313 |
| DIRECT TENSION, T 314, FAILURE STRAIN, MINIMUM 0.300 TEST TEMPERATURE, @60S, °C |
°C | -12 | AASHTO T 240 |
| CRITICAL LOW CRACKING TEMP, PP42, CRITICAL CRACKING TEMP DETERMINED BY PP 42,TEST TEMP, °C |
°C | -12 | ASTM D8225 |
| Specification | Unit | Value | Test Method |
|---|---|---|---|
| Absolute Viscosity, at 60 ◦C | Poise | Min 3200 | ASTM D4402 |
| Kinematic Viscosity, at 135 ◦C | CST | Min 400 | ASTM D2170 |
| Flash Point | ◦C | Min 220 | ASTM D93 |
| Solubility in Trichloroethylene | %WT | Min 99 | ASTM D2042 |
| Penetration Value, at 25 ◦C | 0.1mm | 40-60 | AST M D5 |
| Softening Point | ◦C | Min 25 | ASTM D 36 |
| Specification | Test Method | Min. | Max. |
|---|---|---|---|
| Cement Mixing % | ASTM D6935 | – | 2.0 |
| Storage Stability in 24-H (%) | ASTM D6930 | – | 1 |
| Sieve Test (%) | ASTM D6933 | – | 0.1 |
| Viscosity Saybolt Furel At 50 °C | ASTM D7496 | 20 | 100 |
| Particle Charge (None) | ASTM D7402 | Positive | Positive |
| Residue % | ASTM D6997 | 57 | – |
| Penetration, At 25 °C, 100 gr on 5 sec, (0.1 mm) | ASTM D5 | 40 | 90 |
| Ductility, At 25 °C, 5 cm/min, (cm) | ASTM D113 | 40 | – |
| Solubility in TCE, WT% | ASTM D2042 | 97.5 | – |
| Properties | Min | Max | Test Method |
|---|---|---|---|
| Kinematic Viscosity at 60 °C , mm2/s | 70 | 140 | ASTM D2170 |
| Flash Point (Tag Open Cup), °C | 38 | – | ASTM D3143 |
| Distillate, %Volume of Total Distillate to @360 °C | |||
| To 225 °C | – | 25 | ASTM D402 |
| To 260 °C | 10 | 70 | ASTM D402 |
| To 316 °C | 75 | 93 | ASTM D402 |
| Residue From Distillation to 360 °C (% Vol by Difference) | 55 | – | ASTM D402 |
| Test On Residue from Distillation: | |||
| Penetration, 25 °C, (dmm) | 120 | 300 | ASTM D5 |
| Ductility, 25 °C, (cm) | 100 | – | ASTM D113 |
| Solubility in Trichloroethylene, % | 99 | – | ASTM D2042 |
| Water , % | – | 0.2 | ASTM D95 |
Recommended: For more information about Bitumen Supplier in Kenya and detailed insights into its uses and benefits, simply click on the button below.
SGS Certificate
As a bitumen supplier in Africa, our products come with SGS certification, ensuring they meet international quality and safety standards. The certification verifies:
- Penetration Grade Consistency: Confirmed to meet specified grade levels.
- Purity and Composition: Tested for correct chemical composition and absence of impurities.
- Performance Standards: Compliance with durability, adhesion, and performance metrics.
The SGS certification guarantees that our bitumen is ready to meet the demands of both domestic and international markets, adhering to Africa’s specific requirements.
Packing
1. Jumbo Bag
2. New Steel Drum
1. HDPE Drum: Palletized and Shrink Wrapped
2. 1MT IBC Tank
3. 200kg New Steel Drum—Palletized and Shrink Wrapped
1. Jumbo Bag
2. Steel Drums
3. Flexi Tanks
4. Bulk in Truck Tanker
5. Bulk in Bulk Vessel
6. Bulk in Bitutainer
Exporter of Bitumen in African Countries
RAHA Bitumen Co, as a Bitumen Supplier in Africa. Also, we are Exporting to different destination ports of Africa Countries.
Order Now
If you’re interested in VG 30, please don’t hesitate to reach out. Contact us directly or message us on WhatsApp for prompt service and inquiries.
Supply Bitumen in Different Countries of Africa
RAHA Bitumen Co., as a Bitumen Supplier in Africa Countries, We can Supply to these region such as:
Kenya, Nigeria, Algeria, Angola, Libya, Egypt, South Africa, Ghana, Congo, Cameroon, and Sudan can supply bitumen to them.
Destination Ports of Each Country
- Libya => Tripoli, Misrata, Benghazi
- Kenya => Mombasa, Lamu, Kisumu
- Nigeria => Lagos, Harcourt, Onne
- Liberia => Monrovia, Buchanan, Greenville
- Sudan => Sudan, Ossif, Sawakin
- South Africa => Durban, Cape Town, Richards Bay
- Congo => Matadi, Boma, Banana
- Algeria => Algiers , Oran , Skikda
- Angola => Luanda, Lobito, Cabinda
- Egypt => Alexandria , Damietta, Sokhna
- Ghana => Tema, Takoradi, Sekondi
- Cameroon => Douala, Kribi, Limbe
Our Method to Supply Kenya
We have used two ways, internationally recognized shipping, Including:
- CFR (Cost and Freight): we take responsibility for delivering the bitumen to the port of destination in Africa. This includes covering the cost of the goods and all transportation fees to the port.
- CIF (Cost, Insurance, and Freight): We go a step further by not only covering the cost of the bitumen and freight but also arranging insurance for the shipment during transit. This means you receive a fully insured delivery to the port of destination in Africa.
The Available Bitumen Grades in Africa
- Performance Grade Bitumen (PG): PG 76-22 , PG 76-16, PG 76-10
- Viscosity Grade Bitumen (VG): VG 20, VG 30, VG 40
- Bitumen Emulsion: SS-1, SS-1h, CSS1, CSS-1h,
- Cutback Bitumen: MC-3000, MC-70, MC-30, RC70, RC-30
- Bitumen Penetration: 80/100, 60/70, 40/50
Famous Specification of Bitumen Grades
| Specification | Unit | Standard | MIN | MAX |
|---|---|---|---|---|
| Penetration | dmm. | ASTM D5 | 60 | 70 |
| Softening Point | °C | ASTM D36 | 49 | 56 |
| Specific Gravity | Gr/Cm³ | ASTM D70 | 1.01 | 1.06 |
| Flash Point | °C | ASTM D92 | 230 | – |
| Ductility at 25°C | Cm | ASTM D113 | 100 | – |
| Solubility In Trichloroethylene | WT% | ASTM D2042 | 99 | 100 |
| Loss On Heating | WT% | ASTM D6 | – | 1 |
| Drop-In Penetration After Heating | % | ASTM D6 | – | 20 |
| ASTM D1754 | ASTM D1754 | ASTM D1754 | ASTM D1754 | ASTM D1754 |
| Retained Penetration | % | ASTM D5 | 52 | – |
| Increase In Softening Point | °C | ASTM D36 | – | 10 |
| Ductility | Cm | ASTM D113 | 50 | – |
| Sport Test | A.A.S.H.T.O.102 | A.A.S.H.T.O.102 | Negative | Negative |
| Bitumen 80/100 | Test method | Unit | Specification |
|---|---|---|---|
| Specific gravity @ 25°C | ASTM D70 | Kg/cm3 | 1.01/1.06 |
| Penetration @ 25°C | ASTM D5 | mm/10 | 80/100 |
| Softening point °C | ASTM D36 | °C | 42/50 |
| Ductility @25 °C | ASTM D113 | cm | 100 min |
| Loss on heating(wt) % | ASTM D6 | wt % | 0.2 max |
| Drop in penetration after heating % | ASTM D5-D6 | % | 20 max |
| Flashpoint °C | ASTM D92 | °C | 250 min |
| Solubility in CS2(wt) % | ASTM D4 | wt % | 99.5 min |
| Spot test | A.A.S.H.O.T102 | Negative |
| SPECIFICATION | UNIT | VALUE | METHOD |
|---|---|---|---|
| AVERAGE 7-DAY MAXIMUM PAVEMENT DESIGN TEMPERATURE |
°C | <76 | —— |
| MINIMUM PAVEMENT DESIGN TEMPERATURE |
°C | > -22 | —— |
| FLASH POINT TEMPERATURE | °C | >230 | AASHTO T48 |
| VISCOSITY, T 316, MAXIMUM 3 PAS, TEST TEMP, °C |
°C | 135 | AASHTO T316 |
| DYNAMIC SHEAR, T 315, G*/SIN MINIMUM 1.00 KPA TEST TEMPERATURE, @10 RAD/S,°C |
°C | 76 | AASHTO T315 |
| ROLLING THIN FILM OVEN TEST (T 240) | |||
| MASS CHANGE, MAXIMUM, PERCENT |
% | 1.00 | AASHTO T240 |
| Dynamic Shear G*/sin Minimum 2.2 KPa Test Temperature, @10 rad/s |
°C | >2.2 | AASHTO T315 |
| PRESSURE AGING VESSEL (PAV) TEST (AASHTO R28) | |||
| DYNAMIC SHEAR, T 315, G*/SIN, MAXIMUM 5000 KPA TEST TEMPERATURE, @10 RAD/S |
°C | 31 | AASHTO T315 |
| CREEP STUFFINESS, T 313, S, MAXIMUM 300 MPA, M-VALUE, MINIMUM 0.300 TEST TEMPERATURE, @60S, °C |
°C | -12 | AASHTO T313 |
| DIRECT TENSION, T 314, FAILURE STRAIN, MINIMUM 0.300 TEST TEMPERATURE, @60S, °C |
°C | -12 | AASHTO T 240 |
| CRITICAL LOW CRACKING TEMP, PP42, CRITICAL CRACKING TEMP DETERMINED BY PP 42,TEST TEMP, °C |
°C | -12 | ASTM D8225 |
| Specification | Unit | Value | Test Method |
|---|---|---|---|
| Absolute Viscosity, at 60 ◦C | Poise | Min 3200 | ASTM D4402 |
| Kinematic Viscosity, at 135 ◦C | CST | Min 400 | ASTM D2170 |
| Flash Point | ◦C | Min 220 | ASTM D93 |
| Solubility in Trichloroethylene | %WT | Min 99 | ASTM D2042 |
| Penetration Value, at 25 ◦C | 0.1mm | 40-60 | AST M D5 |
| Softening Point | ◦C | Min 25 | ASTM D 36 |
| Specification | Test Method | Min. | Max. |
|---|---|---|---|
| Cement Mixing % | ASTM D6935 | – | 2.0 |
| Storage Stability in 24-H (%) | ASTM D6930 | – | 1 |
| Sieve Test (%) | ASTM D6933 | – | 0.1 |
| Viscosity Saybolt Furel At 50 °C | ASTM D7496 | 20 | 100 |
| Particle Charge (None) | ASTM D7402 | Positive | Positive |
| Residue % | ASTM D6997 | 57 | – |
| Penetration, At 25 °C, 100 gr on 5 sec, (0.1 mm) | ASTM D5 | 40 | 90 |
| Ductility, At 25 °C, 5 cm/min, (cm) | ASTM D113 | 40 | – |
| Solubility in TCE, WT% | ASTM D2042 | 97.5 | – |
| Properties | Min | Max | Test Method |
|---|---|---|---|
| Kinematic Viscosity at 60 °C , mm2/s | 70 | 140 | ASTM D2170 |
| Flash Point (Tag Open Cup), °C | 38 | – | ASTM D3143 |
| Distillate, %Volume of Total Distillate to @360 °C | |||
| To 225 °C | – | 25 | ASTM D402 |
| To 260 °C | 10 | 70 | ASTM D402 |
| To 316 °C | 75 | 93 | ASTM D402 |
| Residue From Distillation to 360 °C (% Vol by Difference) | 55 | – | ASTM D402 |
| Test On Residue from Distillation: | |||
| Penetration, 25 °C, (dmm) | 120 | 300 | ASTM D5 |
| Ductility, 25 °C, (cm) | 100 | – | ASTM D113 |
| Solubility in Trichloroethylene, % | 99 | – | ASTM D2042 |
| Water , % | – | 0.2 | ASTM D95 |
Recommended: For more information about Bitumen Supplier in Kenya and detailed insights into its uses and benefits, simply click on the button below.
SGS Certificate
As a bitumen supplier in Africa, our products come with SGS certification, ensuring they meet international quality and safety standards. The certification verifies:
- Penetration Grade Consistency: Confirmed to meet specified grade levels.
- Purity and Composition: Tested for correct chemical composition and absence of impurities.
- Performance Standards: Compliance with durability, adhesion, and performance metrics.
The SGS certification guarantees that our bitumen is ready to meet the demands of both domestic and international markets, adhering to Africa’s specific requirements.
Packing
1. Jumbo Bag
2. New Steel Drum
1. HDPE Drum: Palletized and Shrink Wrapped
2. 1MT IBC Tank
3. 200kg New Steel Drum—Palletized and Shrink Wrapped
1. Jumbo Bag
2. Steel Drums
3. Flexi Tanks
4. Bulk in Truck Tanker
5. Bulk in Bulk Vessel
6. Bulk in Bitutainer
Exporter of Bitumen in African Countries
RAHA Bitumen Co, as a Bitumen Supplier in Africa. Also, we are Exporting to different destination ports of Africa Countries.
Order Now
If you’re interested in VG 30, please don’t hesitate to reach out. Contact us directly or message us on WhatsApp for prompt service and inquiries.
Recent post
Table of Content
Recent posts
Categories
Articles
ASTMD946-09
Australian Bitumen
Bitumen Application Articles
Bitumen Emulsion
Bitumen in Road Articles
Bitumen Penetration
China Grades Bitumen
Cutback Bitumen
EN12591-2009
Gilsonite
Medium Curing
Oxidized Bitumen
Penetration Bitumen Articles
Performance Grade Bitumen Articles
PG Bitumen
PMB
Rapid Curing
Slow Curing
Viscosity Grade (VG)
