Manufacturer and Supplier in Vietnam
RAHA Bitumen Co, as a manufacturer and Bitumen Supplier in Vietnam, we have over 13 years Experience in Supplying and Exporting in East Asia Regions.
Destination Ports
we specialize in exporting various types of bitumen to most destination ports across the country, Such as :
- Ho Chi Minh
- Hai Phong
- Da Nang
Our Method to Supply Vietnam
We have used two ways, internationally recognized shipping, Including:
- CFR (Cost and Freight): we take responsibility for delivering the bitumen to the port of destination in Vietnam. This includes covering the cost of the goods and all transportation fees to the port.
- CIF (Cost, Insurance, and Freight): We go a step further by not only covering the cost of the bitumen and freight but also arranging insurance for the shipment during transit. This means you receive a fully insured delivery to the port of destination in Vietnam.
The Available Bitumen Grades
We are providing different grades of Bitumen in deferent region in Southeast Asia. the Available grades of Bitumen including:
- Bitumen penetration: 60/70, 80/100, 50/70, 40/50
- Bitumen Emulsion: CRS-1, SS-1, K1-40, K1-60
- Cutback Bitumen: MC-3000, MC-250, MC-70, MC-30, RC-70, RC-30
- Oxidized Bitumen: 150/50, 115/15, 90/15, 85/25
PROPETRY | MIN | MAX | TEST METHOD |
---|---|---|---|
Viscosity SSF , 25 °C (s) | 20 | 100 | ASTM D244 |
Viscosity SSF , 50 °C (s) | — | — | ASTM D244 |
Storage stability, 24h (%) | — | 1 | ASTM D6930 |
Demulcibility , 0.02 N CaCl2 (%) | — | — | Column 4 Value 4 |
Cement mixing (%) | — | 2 | Column 4 Value 5 |
Sieve (%) | — | 0.1 | ASTM D6933 |
Residue (%) | 57 | — | ASTM-D244 |
Solubility in trichloroethylene % | 97.5 | — | ASTM D2042 |
Penetration 77°F (25°C) 100g,5s mm | 40 | 90 | ASTM D5 |
ductility, 77°F (25 °C), 5cm/min (cm) | 40 | — | ASTM D113 |
Properties | Min | Max | Test Method |
---|---|---|---|
Kinematic Viscosity at 60 °C , mm2/s | 70 | 140 | ASTM D2170 |
Flash Point (Tag Open Cup), °C | 38 | – | ASTM D3143 |
Distillate, %Volume of Total Distillate to @360 °C | |||
To 225 °C | – | 25 | ASTM D402 |
To 260 °C | 10 | 70 | ASTM D402 |
To 316 °C | 75 | 93 | ASTM D402 |
Residue From Distillation to 360 °C (% Vol by Difference) | 55 | – | ASTM D402 |
Test On Residue from Distillation: | |||
Penetration, 25 °C, (dmm) | 120 | 300 | ASTM D5 |
Ductility, 25 °C, (cm) | 100 | – | ASTM D113 |
Solubility in Trichloroethylene, % | 99 | – | ASTM D2042 |
Water , % | – | 0.2 | ASTM D95 |
Specification | Unit | Standard | MIN | MAX |
---|---|---|---|---|
Penetration | dmm. | ASTM D5 | 60 | 70 |
Softening Point | °C | ASTM D36 | 49 | 56 |
Specific Gravity | Gr/Cm³ | ASTM D70 | 1.01 | 1.06 |
Flash Point | °C | ASTM D92 | 230 | – |
Ductility at 25°C | Cm | ASTM D113 | 100 | – |
Solubility In Trichloroethylene | WT% | ASTM D2042 | 99 | 100 |
Loss On Heating | WT% | ASTM D6 | – | 1 |
Drop-In Penetration After Heating | % | ASTM D6 | – | 20 |
ASTM D1754 | ASTM D1754 | ASTM D1754 | ASTM D1754 | ASTM D1754 |
Retained Penetration | % | ASTM D5 | 52 | – |
Increase In Softening Point | °C | ASTM D36 | – | 10 |
Ductility | Cm | ASTM D113 | 50 | – |
Sport Test | A.A.S.H.T.O.102 | A.A.S.H.T.O.102 | Negative | Negative |
Bitumen 80/100 | Test method | Unit | Specification |
---|---|---|---|
Specific gravity @ 25°C | ASTM D70 | Kg/cm3 | 1.01/1.06 |
Penetration @ 25°C | ASTM D5 | mm/10 | 80/100 |
Softening point °C | ASTM D36 | °C | 42/50 |
Ductility @25 °C | ASTM D113 | cm | 100 min |
Loss on heating(wt) % | ASTM D6 | wt % | 0.2 max |
Drop in penetration after heating % | ASTM D5-D6 | % | 20 max |
Flashpoint °C | ASTM D92 | °C | 250 min |
Solubility in CS2(wt) % | ASTM D4 | wt % | 99.5 min |
Spot test | A.A.S.H.O.T102 | Negative |
Bitumen 115/15 | Specification | Test method |
---|---|---|
Specific gravity @ 25/25 cg | 1.05 | D-70 |
Penetration @ 25 c | 20/10 | D-5 |
Softening point c | 110/120 | D-36 |
Ductility @25 c | 1.5 min | D-113 |
Loss on heating(wt) % | 0.2 Max | D-6 |
Flashpoint c | 260 min | D-92 |
Solubility is CS2(wt) % | 99 min | D-4 |
Packing of Kinds of Bitumen
1. 25kg Carton Box- Palletized and Shrink
Wrapped:

2. 25kg PP Bag- Palletized and Shrink
Wrapped

1. Jumbo Bag

1. Jumbo Bag

2. Steel Drums

3. Flexi Tanks

4. Bulk in Truck Tanker

5. Bulk in Bulk Vessel

6. Bulk in Bitutainer

SGS Certification
Our Bitumen products include SGS certification that strictly follows international norms for quality and safety.
The SGS certificate ensures that our Bitumen is ready to meet the demands of the domestic and international markets.

Order Now
If you’re interested in specific grades of Bitumen or need assistance choosing the right product, please don’t hesitate to reach out. Contact us directly or message us on WhatsApp for prompt service and inquiries.
Manufacturer and Supplier in Vietnam
RAHA Bitumen Co, as a manufacturer and Bitumen Supplier in Vietnam, we have over 13 years Experience in Supplying and Exporting in East Asia Regions.
Destination Ports
we specialize in exporting various types of bitumen to most destination ports across the country, Such as :
- Ho Chi Minh
- Hai Phong
- Da Nang
Our Method to Supply Vietnam
We have used two ways, internationally recognized shipping, Including:
- CFR (Cost and Freight): we take responsibility for delivering the bitumen to the port of destination in Vietnam. This includes covering the cost of the goods and all transportation fees to the port.
- CIF (Cost, Insurance, and Freight): We go a step further by not only covering the cost of the bitumen and freight but also arranging insurance for the shipment during transit. This means you receive a fully insured delivery to the port of destination in Vietnam.
The Available Bitumen Grades
We are providing different grades of Bitumen in deferent region in Southeast Asia. the Available grades of Bitumen including:
- Bitumen penetration: 60/70, 80/100, 50/70, 40/50
- Bitumen Emulsion: CRS-1, SS-1, K1-40, K1-60
- Cutback Bitumen: MC-3000, MC-250, MC-70, MC-30, RC-70, RC-30
- Oxidized Bitumen: 150/50, 115/15, 90/15, 85/25
PROPETRY | MIN | MAX | TEST METHOD |
---|---|---|---|
Viscosity SSF , 25 °C (s) | 20 | 100 | ASTM D244 |
Viscosity SSF , 50 °C (s) | — | — | ASTM D244 |
Storage stability, 24h (%) | — | 1 | ASTM D6930 |
Demulcibility , 0.02 N CaCl2 (%) | — | — | Column 4 Value 4 |
Cement mixing (%) | — | 2 | Column 4 Value 5 |
Sieve (%) | — | 0.1 | ASTM D6933 |
Residue (%) | 57 | — | ASTM-D244 |
Solubility in trichloroethylene % | 97.5 | — | ASTM D2042 |
Penetration 77°F (25°C) 100g,5s mm | 40 | 90 | ASTM D5 |
ductility, 77°F (25 °C), 5cm/min (cm) | 40 | — | ASTM D113 |
Properties | Min | Max | Test Method |
---|---|---|---|
Kinematic Viscosity at 60 °C , mm2/s | 70 | 140 | ASTM D2170 |
Flash Point (Tag Open Cup), °C | 38 | – | ASTM D3143 |
Distillate, %Volume of Total Distillate to @360 °C | |||
To 225 °C | – | 25 | ASTM D402 |
To 260 °C | 10 | 70 | ASTM D402 |
To 316 °C | 75 | 93 | ASTM D402 |
Residue From Distillation to 360 °C (% Vol by Difference) | 55 | – | ASTM D402 |
Test On Residue from Distillation: | |||
Penetration, 25 °C, (dmm) | 120 | 300 | ASTM D5 |
Ductility, 25 °C, (cm) | 100 | – | ASTM D113 |
Solubility in Trichloroethylene, % | 99 | – | ASTM D2042 |
Water , % | – | 0.2 | ASTM D95 |
Specification | Unit | Standard | MIN | MAX |
---|---|---|---|---|
Penetration | dmm. | ASTM D5 | 60 | 70 |
Softening Point | °C | ASTM D36 | 49 | 56 |
Specific Gravity | Gr/Cm³ | ASTM D70 | 1.01 | 1.06 |
Flash Point | °C | ASTM D92 | 230 | – |
Ductility at 25°C | Cm | ASTM D113 | 100 | – |
Solubility In Trichloroethylene | WT% | ASTM D2042 | 99 | 100 |
Loss On Heating | WT% | ASTM D6 | – | 1 |
Drop-In Penetration After Heating | % | ASTM D6 | – | 20 |
ASTM D1754 | ASTM D1754 | ASTM D1754 | ASTM D1754 | ASTM D1754 |
Retained Penetration | % | ASTM D5 | 52 | – |
Increase In Softening Point | °C | ASTM D36 | – | 10 |
Ductility | Cm | ASTM D113 | 50 | – |
Sport Test | A.A.S.H.T.O.102 | A.A.S.H.T.O.102 | Negative | Negative |
Bitumen 80/100 | Test method | Unit | Specification |
---|---|---|---|
Specific gravity @ 25°C | ASTM D70 | Kg/cm3 | 1.01/1.06 |
Penetration @ 25°C | ASTM D5 | mm/10 | 80/100 |
Softening point °C | ASTM D36 | °C | 42/50 |
Ductility @25 °C | ASTM D113 | cm | 100 min |
Loss on heating(wt) % | ASTM D6 | wt % | 0.2 max |
Drop in penetration after heating % | ASTM D5-D6 | % | 20 max |
Flashpoint °C | ASTM D92 | °C | 250 min |
Solubility in CS2(wt) % | ASTM D4 | wt % | 99.5 min |
Spot test | A.A.S.H.O.T102 | Negative |
Bitumen 115/15 | Specification | Test method |
---|---|---|
Specific gravity @ 25/25 cg | 1.05 | D-70 |
Penetration @ 25 c | 20/10 | D-5 |
Softening point c | 110/120 | D-36 |
Ductility @25 c | 1.5 min | D-113 |
Loss on heating(wt) % | 0.2 Max | D-6 |
Flashpoint c | 260 min | D-92 |
Solubility is CS2(wt) % | 99 min | D-4 |
Packing of Kinds of Bitumen
1. 25kg Carton Box- Palletized and Shrink
Wrapped:

2. 25kg PP Bag- Palletized and Shrink
Wrapped

1. Jumbo Bag

1. Jumbo Bag

2. Steel Drums

3. Flexi Tanks

4. Bulk in Truck Tanker

5. Bulk in Bulk Vessel

6. Bulk in Bitutainer

SGS Certification
Our Bitumen products include SGS certification that strictly follows international norms for quality and safety.
The SGS certificate ensures that our Bitumen is ready to meet the demands of the domestic and international markets.

Order Now
If you’re interested in specific grades of Bitumen or need assistance choosing the right product, please don’t hesitate to reach out. Contact us directly or message us on WhatsApp for prompt service and inquiries.