Performance Grade 76-10 Description
PMB PG Bitumen 76-10 is a type of bitumen that is graded according to its performance in different temperatures and is highly used in flexible pavement. PG bitumen grading system is based on the bitumen performance in low, medium, and high temperatures. The PG 76-10 Bitumen means this grade can be used in an area where its maximum temperature is 76 and its lowest temperature is -10 degrees Celsius.
Delivery Term
We have used two ways, internationally recognized shipping, Including:
- CFR
- CIF
Standard of Performance Grade 76-10
The Standard laid down for Performance Grade Bitumen (PG) are usually as prescribed by the relevant industry organizations and government agencies. These are specifications that outline the requirements for properties and testing methods to ensure the quality and performance of the bitumen. General standards applied to PG 76-10 include, among others:
ASTM D36-22: Standard Specification for Bituminous Materials, for Use in Road Construction.
AASHTO M 224-23: Standard Specification for Emulsified Asphalt.
EN 12593: Bitumen for road construction – Specifications.
ISO 9001: Quality management systems – Requirements for any organization.
Specification
| Specification | Unit | Value | Method |
|---|---|---|---|
| Average 7-Day Maximum Pavement Design Temperature | °C | < 76 | – |
| Minimum Pavement Design Temperature | °C | > -10 | – |
| Flash Point Temperature | °C | Min230 | AASHTO T48 |
| Viscosity Maximum 3 Pas, Test Temperature | °C | 135 | AASHTO T316 |
| Dynamic Shear, T 315, G*/sin Minimum 1 KPa Test Temperature, @10 rad/s,°C | °C | 76 | AASHTO T315 |
| Rolling Thin Film Oven Test (AASHTO T240) | |||
| Mass Change, Maximum, Percent | °C | 1.00 | – |
| Dynamic Shear G*/sin Minimum 2.2 KPa Test Temperature, @10 rad/s | °C | 76 | AASHTO T315 |
| Pressure Aging Vessel (PAV) Test (AASHTO R28) | |||
| PAV Aging Temperature | °C | 100 (110) | AASHTO R28 |
| Dynamic Shear G*/sin Maximum 5000 KPa Test Temperature, @10 rad/s | °C | 37 | AASHTO T315 |
| Creep Stiffiness S Maximum 300 Mpa M-Value Minimum 0.300 Test Temp,@60s | °C | 0 | AASHTO T313 |
| Direct Tension, Failure Strain, Minimum 0.300 Test Temperature, @60s, °C | °C | 0 | AASHTO T314 |
| Critical Low Cracking Temp, Critical Cracking Temp Determined by PP 42,Test Temp, °C | – | 0 | AASHTO PP42 |
Packing of PG 76-10
| Steel Drum | Detailes |
|---|---|
 |
180kg New Steel Drum => 150kg New Steel Drum => |
| Jumbo Bag | Detailes |
|---|---|
 |
1MT Jumbo Bag with Pallet and Steel 1MT Jumbo Bag without Pallet and Steel |
| Flexi Tank | Detailes |
|---|---|
 |
flexible containers designed to fit inside standard 20-foot or 40-foot shipping containers. |
| Bulk | Detailes |
|---|---|
 Truck Tanker |
Loading 24-25 Ton in Bulk Tanker. |
 Bulk Vessel |
Loading 1,000-30,000 Ton in Bitumen Carrier Vessel. |
 Bitutainer |
Loading 25 Ton in Bitutainer. |
Supplier of PMB PG Bitumen 76-10
RAHA Bitumen Co., as a Supplier of PG 76-10 Bitumen in the most destinations such as Africa, East Asia. We Resisted in Dubai, UAE, is manufacturer and supplier, different types of performance grade products with excellent quality.
Supply PG Bitumen to East Asia and Africa
in East Asia can be supply including:
- China
- Malaysia
- Thailand
- Taiwan
- Vietnam
- Philippines
- Indonesia
- Cambodia
In Africa can be Export such as:
- Kenya
- Tanzania
- Ghana
- Nigeria
- Ethiopia
- Uganda
- South Africa
- Morocco
- Algeria
- Egypt
- Djibouti
- Mozambique
Our Payment Term
Our terms of payment are TT/30% in advance and balance after copy of BL. This secures 30% of the payment in advance while the remaining balance is settled when a copy of the Bill of Lading has been availed, ensuring goods are in transit and well documented.
Order Now
If you’re interested in PG 76-10 Bitumen or need assistance choosing the right product, please don’t hesitate to reach out. Contact us directly or message us on WhatsApp for prompt service and inquiries.
